BEEP COMMAND

Purpose:   Sets a TSR, that changes the simple sound signal, generated by
           DOS after [Ctrl-Break] has been pressed for a complex one.

Syntax:    BEEP [/M:mm][/T]

Type:      External command

Description:
     /M switch defines the index number of a generated signal. mm ranges
from 1 to 3. Having defined /M:0 as the parameter, you can switch off the
signal.  If you want check or choose the necessary signal, you should press
the /M switch together with the /T switch. Herewith you will hear the signal
while the resident won't be loaded.