WORKING  WITH  MS-WINDOWS

     To install LOTLAN for work with WINDOWS:

1.Start SETUP programs from the WINDOWS directory.  The following
menu will appear:

  Windows Setup
  -------------
    If your computer or network appears on the Hardware Compatibility List
    with an asterisk next to it, press F1 before continuing.
    System Information
       Computer:         PTS-DOS System
       Display:          TRIDENT 1024x768-16c Large Font
       Mouse:            Microsoft, or IBM PS/2
       Keyboard:         Enhanced 101 or 102 key US and Non US keyboards
       Keyboard Layout:  US
       Language:         US
       Codepage:         English (437)
       Network:          No Network Installed
       Complete Changes: Accept the configuration shown above.
   To change a system setting, press the UP or DOWN ARROW key to
   move the highlight to the setting you want to change. Then press
   ENTER to see alternatives for that item. When you have finished
   changing your settings, select the "Complete Changes" option
   to quit Setup.

  ENTER=Continue  F1=Help  F3=Exit

2.Select "Network" item.
3.Then select "Other" item.  Specify the drive and path to LotLAN files:

 Windows Setup
 -------------
       Please insert the network driver disk provided by the hardware
  manufacturer. If the files from this disk are located on a different
  drive and/or directory, type the path where the files can be  found.

  C:\CP


     The SETUP program will automatically modify the SYSTEM.INI file to make
it compatible with the network software. In particular, the section [386nh]
of the SYSTEM.INI file will be expanded to include the following lines:

      NETWORK=*VNETBIOS,LOTLAN.386
      Timer Critical Section=5000
      ReflectDOSInt2A=TRUE
      PSP Increment=1
      UniqueDOSPSP=TRUE
      OVERLappedIO=OFF
      :exit

                          Working with WINDOWS

     When working with LotLAN and WINDOWS be aware of the following:

1. To ensure safe server and work station operation WINDOWS program can be
   used only after installing special WINDOWS drivers and modifying
   parameters in SYSTEM.INI file.
2.It is not recommended to start WINDOWS if server is equipped with i286
  processor: with these processors WINDOWS operates in real and standard
  modes only.
3.When using server with i386 and higher processors WINDOWS should be
  launched only in extended mode.